- Running SilverStripe On Nginx (LEMP) On Debian Wheezy/Ubuntu 13.04
This tutorial shows how you can install and run SilverStripe on a Debian Wheezy or Ubuntu 13.04 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced "engine x") + MySQL + PHP). nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.
in Public bookmarks - Running Simple Groupware On Nginx (LEMP) On Debian Squeeze/Ubuntu 11.10
This tutorial shows how you can install and run Simple Groupware on a Debian Squeeze or Ubuntu 11.10 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced "engine x") + MySQL + PHP). Simple Groupware is an open source enterprise groupware that offers email, calendaring, contacts, tasks, document management, project management, synchronization with Outlook and cell phones, full-text search, extensions and many more. nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.
in Public bookmarks - Running SugarCRM Community Edition On Nginx (LEMP) on Debian Squeeze/Ubuntu 11.04
SugarCRM is a webbased CRM solution written in PHP. SugarCRM is available in different flavours called "Editions" ("Community" (free), "Professional", and "Enterprise"). In this tutorial I will describe the installation of the free Community Edition on a Debian Squeeze or Ubuntu 11.04 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced "engine x") + MySQL + PHP). With the modules My Portal, Calendar, Activities, Contacts, Accounts, Leads, Opportunities, Cases, Bugtracker, Documents and Email, SugarCRM Community Edition offers everything that can be expected from a CRM solution.
in Public bookmarks - Running TYPO3 4.6 On Nginx (LEMP) On Debian Squeeze/Ubuntu 11.10
This tutorial shows how you can install and run a TYPO3 (version 4.6) web site on a Debian Squeeze or Ubuntu 11.10 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced "engine x") + MySQL + PHP). The guide also covers the use of the nc_staticfilecache extension which allows TYPO3 to cache pages as complete .html files for faster delivery (increases response times for static pages by a factor of 230; it's similar to Drupal's Boost module). nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.
in Public bookmarks - Running Vhosts Under Separate UIDs/GIDs With Apache2 mpm-peruser On Debian Etch
This article explains how you can install and configure apache2-mpm-peruser on a Debian Etch server. apache2-mpm-peruser is an MPM (Multi-Processing Module) for the Apache 2 web server, very similar to apache2-mpm-itk, but faster (almost as fast as apache2-mpm-prefork). mpm-peruser allows you to run each of your vhosts under a separate UID and GID - in short, the scripts and configuration files for one vhost no longer have to be readable for all the other vhosts. It is based on metuxmpm, a working implementation of the perchild MPM. The result is a sane and secure web server environment for your users, without kludges like PHP's safe_mode.
in Public bookmarks - Running WordPress On Nginx (LEMP) on Debian Squeeze/Ubuntu 11.04
This tutorial shows how you can install and run a WordPress blog on a Debian Squeeze or Ubuntu 11.04 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced "engine x") + MySQL + PHP). In addition to that I will also show you how you can use the WordPress plugins WP Super Cache and W3 Total Cache with nginx. nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.
in Public bookmarks - Scheduled Backups With Rsyncbackup On Debian Etch
This document describes how to set up and configure rsyncbackup on Debian Etch. Rsyncbackup is a Perl script that cooperates with rsync. It is easy to configure and able to create scheduled backups (partial and incremental backups).
in Public bookmarks - Server Monitoring With Icinga On Debian Squeeze
Icinga is an enterprise grade open source monitoring system which keeps watch over networks and any conceivable network resource, notifies the user of errors and recoveries and generates performance data for reporting. It is a fork of Nagios. This tutorial explains how to install Icinga on a Debian Squeeze server to monitor this server and another Debian Squeeze server.
in Public bookmarks - Server Monitoring With munin And monit On Debian Etch
In this article I will describe how you can monitor your Debian Etch server with munin and monit. munin produces nifty little graphics about nearly every aspect of your server (load average, memory usage, CPU usage, MySQL throughput, eth0 traffic, etc.) without much configuration, whereas monit checks the availability of services like Apache, MySQL, Postfix and takes the appropriate action such as a restart if it finds a service is not behaving as expected. The combination of the two gives you full monitoring: graphics that let you recognize current or upcoming problems (like "We need a bigger server soon, our load average is increasing rapidly."), and a watchdog that ensures the availability of the monitored services.
in Public bookmarks - Server Monitoring With munin And monit On Debian Lenny
In this article I will describe how you can monitor your Debian Lenny server with munin and monit. munin produces nifty little graphics about nearly every aspect of your server (load average, memory usage, CPU usage, MySQL throughput, eth0 traffic, etc.) without much configuration, whereas monit checks the availability of services like Apache, MySQL, Postfix and takes the appropriate action such as a restart if it finds a service is not behaving as expected. The combination of the two gives you full monitoring: graphics that lets you recognize current or upcoming problems (like "We need a bigger server soon, our load average is increasing rapidly."), and a watchdog that ensures the availability of the monitored services.
in Public bookmarks - Server Monitoring With munin And monit On Debian Squeeze
In this article I will describe how you can monitor your Debian Squeeze server with munin and monit. munin produces nifty little graphics about nearly every aspect of your server (load average, memory usage, CPU usage, MySQL throughput, eth0 traffic, etc.) without much configuration, whereas monit checks the availability of services like Apache, MySQL, Postfix and takes the appropriate action such as a restart if it finds a service is not behaving as expected. The combination of the two gives you full monitoring: graphics that lets you recognize current or upcoming problems, and a watchdog that ensures the availability of the monitored services.
in Public bookmarks - Server Monitoring With munin And monit On Debian Wheezy
In this article I will describe how you can monitor your Debian Wheezy server with munin and monit. munin produces nifty little graphics about nearly every aspect of your server without much configuration, whereas monit checks the availability of services like Apache, MySQL, Postfix and takes the appropriate action such as a restart if it finds a service is not behaving as expected. The combination of the two gives you full monitoring: graphics that lets you recognize current or upcoming problems, and a watchdog that ensures the availability of the monitored services.
in Public bookmarks - Serving CGI Scripts With Nginx On Debian Squeeze/Ubuntu 11.04
This tutorial shows how you can serve CGI scripts (Perl scripts) with nginx on Debian Squeeze/Ubuntu 11.04. While nginx itself does not serve CGI, there are several ways to work around this. I will outline three solutions: the first is to proxy requests for CGI scripts to Thttpd, a small web server that has CGI support, while the second and third solution are very similar - both use a CGI wrapper to serve CGI scripts.
in Public bookmarks - Setting Up A High-Availability Load Balancer (With Failover and Session Support) With HAProxy/Heartbeat On Debian Etch
This article explains how to set up a two-node load balancer in an active/passive configuration with HAProxy and heartbeat on Debian Etch. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using heartbeat, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. HAProxy is session-aware, which means you can use it with any
in Public bookmarks - Setting Up A High-Availability Load Balancer (With Failover and Session Support) With HAProxy/Heartbeat On Debian Lenny
This article explains how to set up a two-node load balancer in an active/passive configuration with HAProxy and heartbeat on Debian Lenny. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using heartbeat, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. HAProxy is session-aware, which means you can use it with any
in Public bookmarks - Setting Up A High-Availability Load Balancer (With Failover and Session Support) With HAProxy/Keepalived On Debian Etch
This article explains how to set up a two-node load balancer in an active/passive configuration with HAProxy and keepalived on Debian Etch. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using keepalived, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. HAProxy is session-aware, which means you can use it with an
in Public bookmarks - Setting Up A High-Availability Load Balancer (With Failover and Session Support) With Perlbal/Heartbeat On Debian Etch
This article explains how to set up a two-node load balancer in an active/passive configuration with Perlbal and heartbeat on Debian Etch. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using heartbeat, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. Perlbal is session-aware, which means you can use it with any
in Public bookmarks - Setting Up A High-Availability Load Balancer With HAProxy/Keepalived On Debian Lenny
This article explains how to set up a two-node load balancer in an active/passive configuration with HAProxy and keepalived on Debian Lenny. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using keepalived, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. HAProxy is session-aware, which means you can use it with a
in Public bookmarks - Setting Up A High-Availability Load Balancer With HAProxy/Wackamole/Spread On Debian Etch
This article explains how to set up a two-node load balancer in an active/passive configuration with HAProxy, Wackamole, and Spread on Debian Etch. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using Wackamole and Spread, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. HAProxy is session-aware, which means you
in Public bookmarks - Setting Up A Mail Server Using Exim4, Clamav, Dovecot, SpamAssassin And Many More On Debian
This howto describes one way to build a scalable, secure, full-featured mail platform. It offers virtual hosting of mailboxes in maildir format with support for quotas and server-side filtering, domain aliasing, address aliasing, address forwarding, catchall addresses. Relaying is secured with STARTTLS and SMTP-AUTH. Incoming mails are checked for viruses, spam, and checked against SPF policy and DNSBL.
in Public bookmarks
Copyright © 2003-2010 Netvouz. All rights reserved. |
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy